The Belle WPX 3/30 is powered by a Loncin/Belle G200F petrol engine, and is suitable for pumping sandy or muddy water and debris up to 1 inch (25mm) in diameter.
- Suitable for pumping sandy or muddy water and debris up to 1" (25.4mm) in diameter.
- Robust large diameter frame for the harshest conditions.
- Stackable frame design with single point lifting to reduce environmental impact and minimize manual handling risk. Complete with securing pin for added safety.
- Can be stacked with Altrad Belle GPX 2700 & GPX 3400 Generators.
- Protection belly plate to aid use on soft ground.
- Cast-iron volute and impeller for long life performance and durability.
- High output capacity of 1000 ltr / min.
- Max. head height of 30m for use in a wide range of applications.
- Max. suction lift of 6m.
- Powerful Loncin/Belle G200F petrol engine.
- 3" / 80mm suction and discharge ports.
- Removeable side guards for ease of access to service points.
- Easy to maintain and remove blockages on-site without tools.
Ideally used for flood defence, construction and industrial work or agricultural pumping requirements, it provides a maximum flow rate of 1000 litres per minute, allowing you to rapidly move large pools of dirty and unrefined water. This impressive pumping power is made possible due to the large 3" (80mm) inlet and outlet. It provides a suction lift of 6m and a maximum head height of 30m.
The rugged, large diameter frame comes with a protection belly for use on soft ground, a securing pin, and a single lifting point to reduce environmental impact and minimise manual handling. The side-guards are removable for ease of access to service points and it is easy to maintain, and remove blockages without the need for tools.
The cast-iron volute and impeller provide long life performance and durability.
Weighing just 44kg, this is a water pump which is built with transportation and storage in mind. It can be stacked with Belle GPX 2700 and GPX 3400 generators.