Tank Outlet Ball-Valve Tap, Filter And Hose Barb Kit - 3/4"

A tank outlet plus ball-valve tap and inline filter, with barb, connectors and gasket. Ideal for attaching a 3/4" suction hose to a tank or wheelie bin

Components in order from tank to hose

• 805 series polypropylene tank outlet (8051201)
• 3/4" BSP Female / Female polypropylene barrel connector (8054201)
• Ball valve tap - nickel/chromium construction (400-1012)
• 3/4" BSP Male / Male polypropylene Nipple connector (8056201)
• 3/4" Y-type Brass Inline filter (402-1003)
• 19mm polypropylene hose barb (8001203)
• 1 1/4" EPDM Gasket (G00002010) 

Fitting guide

Attach the tank outlet to the hole in the tank. This will leave a 3/4" male thread. Attach the female / female barrel connection to this part. Attach the ball valve tap next. Screw the male / male nipple into this, and the brass inline filter into that. The last piece is the hose barb, to which you can attach the hose.

The ball-valve tap is two way, if there is room for the lever to operate fully, with it pointing towards the tank, you can attach it directly to the tank outlet part, and you can leave out the female/female barrel connector and male/male nipple